Atlas dispatching platform
Real-time remote monitoring and control of engineering systems — from any device, 24/7. Mimic diagrams, trends, ISA-18.2 alarms and a single control room for all facilities.
Atlas is our own dispatching platform, which we develop and maintain ourselves. It unites the equipment of different facilities into a single monitoring and control system: the operator sees the state of boiler houses, heating substations, pump stations, ventilation and other engineering systems on one screen and controls them remotely. This is not a resale of someone else’s SCADA under our name, but our own product — so we can adapt it to the client’s tasks, add drivers and features, and remain independent of a third-party vendor’s licensing policy.
The platform covers the «top level» of automation. The local automation (controllers, I&C) controls the equipment on site, while Atlas handles data acquisition, visualization, alarms, archiving and remote access. This approach increases reliability: the facility keeps working even when the connection is lost, while the dispatcher has the full picture and control tools from anywhere.
What the platform can do
A complete set of dispatching tools — from clear mimic diagrams to control with confirmation of critical commands.
- 01Interactive mimic diagrams
A live diagram of the facility with equipment statuses, sensor values and control right from the diagram.
- 02Trends and archive
A history of parameters over any period — for analysis, root-cause investigation and reporting.
- 03ISA-18.2 alarms
Prioritization, acknowledgement and a log. Alarm rationalization — the operator sees what matters, not a flood of false trips.
- 04Remote control
Changing setpoints and sending commands with role-based permissions and confirmation of critical actions.
- 0524/7 access
Web client and mobile app, a secure connection — control of the facility from anywhere.
- 06Multi-facility
Dozens of facilities in one control room with a unified event log and access rights.
- 07Notifications
Alerts about alarms and deviations so you can react before a problem becomes an emergency.
- 08Log and audit
All events and operator actions are recorded — transparency of operation and incident analysis.
Equipment and protocols
The platform collects data over the industrial protocols Modbus RTU/TCP, BACnet and OPC UA and works with controllers and devices from different manufacturers. We have connected equipment from ОВЕН/Owen, Siemens, Schneider Electric, Carel, Danfoss and others — so Atlas integrates both into new projects and into already operating systems that have supported communication interfaces.
Open protocols mean independence: you are not tied to a single vendor and can keep developing the system without replacing all the equipment.
Deployment and security
Atlas can be deployed on our dispatching server or on the client’s server (on-premise), depending on data and security requirements. It is a domestic product, which reduces import-dependency risks.
Access is protected with authentication and role-based permissions, a log of events and operator actions is kept, and critical commands can be additionally confirmed. We develop the platform with industrial-grade security requirements in mind.
Dispatching facilities
- Boiler houses, central and individual heating substations (IHS).
- Water-supply and firefighting pump stations.
- Supply-exhaust ventilation, air conditioning, heating.
- Fire suppression systems and building services (BMS).
- Energy metering and monitoring of equipment parameters.
How Atlas differs from a typical SCADA
There are many SCADA systems on the market, and most integrators resell someone else’s product under license. We chose a different path — we develop our own platform. For the client this means several practical differences.
- Our own product, not a vendor license. We develop the platform ourselves, can add a needed driver or feature, and don’t depend on someone else’s pricing policy or sanction risks.
- Adaptation to the facility. Mimic diagrams, alarm logic and reports are tailored to your technology rather than squeezed into the limits of an off-the-shelf solution.
- Domestic development. Reducing import dependency is an important factor for government and infrastructure facilities.
- Single accountability. We design, assemble panels, program controllers and run dispatching on our own platform — one contractor is responsible for the whole stack.
- Mobile access out of the box. A web and mobile client are part of the platform — no need to buy separate modules for each workstation.
How we implement the platform
Connecting to dispatching is an engineering project, not «installing a program». We run it in clear stages and take responsibility for the result.
- Survey. We study the facility, the equipment and the available communication interfaces, and define the list of parameters to monitor and control.
- Connecting equipment. We set up data acquisition over Modbus, BACnet or OPC UA; if needed, we refine the panels and controller program.
- Platform configuration. We draw mimic diagrams, set up tags, trends, access rights and the ISA-18.2 alarm system for your technology.
- Commissioning and training. We check all modes, train dispatchers and operators, and hand over the documentation.
- Support. Through the platform we run remote monitoring, assist and develop the system as the facility grows.
The result is not just a «screen with numbers», but a working control room that reduces accidents, saves resources and makes operation transparent.
Frequently asked questions about the platform
How is the Atlas platform different from a regular SCADA?
Atlas is our own product, not a resale of someone else’s SCADA. We develop it ourselves, so we can adapt the platform to the client’s facility, add drivers and features, and we don’t depend on a third-party vendor’s licensing policy.
What equipment and protocols does the platform support?
Data is collected over the industrial protocols Modbus RTU/TCP, BACnet and OPC UA. The platform works with controllers and devices from different manufacturers — ОВЕН/Owen, Siemens, Schneider Electric, Carel, Danfoss and others.
Do you need constant internet, and can it be deployed on your own server?
The platform can be deployed on our dispatching server or on the client’s server (on-premise). The local automation at the facility keeps running even if the connection is lost — the platform handles monitoring, dispatching and remote access.
Is remote control secure?
Access is protected with authentication and role-based permissions, a log of events and operator actions is kept, and critical commands can be additionally confirmed. We develop the platform with industrial-grade security requirements in mind.
Can an already operating facility be connected?
Yes. We connect both new and existing systems to the platform, provided the equipment has supported communication interfaces. We will carry out a survey and propose an integration plan.